Preparation conditions MASTER plastic rattan garden furniture system to control the mold temperature

Preparation conditions of temperature control system control mold temperature, mold temperature machine, the mold heat transfer fluid is composed of three parts. In order to ensure that heatMASTER pe pipe fitting mold can be added to the mold or moved, each part of the system must meet the following conditions: the first is in the mold, cooling channel surface area must be large enough, the ability to channel diameter to match the pump (pump pressure). The temperature distribution in the cavity on the deformation and internal pressure have a great impact. A reasonable set of cooling channel can reduce the internal pressure, so as to improve the quality of injection molded parts. It also can shorten the cycle time, reduce product cost. The second is the mold temperature machine must be able to keep constant temperature heat conducting fluid in the range of 1 ℃ -3 ℃ within, depending on the product MASTER zplastic box moldquality requirements set. Third is a heat transfer fluid must have good heat conduction ability, the most important is, it must be able to import or export a large amount of heat in the shortest amount of time. From the thermodynamic point of view, the water is more obvious than that of oil well.